|
Product Description
GE Bayer Silicones EP 1056/70P, EP 1066/70P and
EP 1076/80P Silicone Elastomers are availabe in
50, 60 and 70 Shore A hardness. These are especially
designed for the manufacture/prototyping of functional/decorative
components.
KEY PRODUCT FEATURES
• High level of strength, closer tolerances
and better reproduction of details.
• Fast turnaround for prototypes and product
development parts.
• Low-cost, fast start-up production with
low-to-high volume capabilities.
• Low shrinkage
• High temperature withstandability
• Excellent service life.
TYPICAL
PRODUCT DATA
Comparative Property Profile for the Metal Casting
grades
|
Property |
Units |
EP1056/ 70P |
EP1066/ 70P |
EP1076/80P |
Specific Gravity |
— |
1.52 |
1.54 |
1.48 |
Hardness |
Shore
A |
70 |
70 |
78 |
Tensile Strength |
MPa |
6 |
5 |
6.7 |
Elongation at Break |
(%) |
200 |
220 |
150 |
Tear Strength |
kN/m |
15 |
20 |
15 |
HANDLING AND SAFETY
Material Safety Data Sheets are available upon request
from GEBSI. Similar information for vulcanizing
agents and other chemicals used with GE products
should be obtained from your suppliers.
STORAGE WARRANTY PERIOD
The warranty period is 6 months from the date of
shipment if stored in the original unopened container
below 27°C (80°F). Re-testing after 6 months
recommended to assure typical performance.
SPECIFICATIONS
Typical product data values should not be used as
a basis for product specifications. Assistance and
requirements are available by contacting GE Bayer
Silicones. |
