|
| BUTYL
RUBBER BK-1675 N |
| BK-1675
N is used in production of tyre, inner tubes, diaphragms
of shaper - vulcanizers, latex of butyl rubber. |
| MAIN
QUALITY CHARACTERISTICS |
| Appearance |
Color
is homogenous for
the whole bale from white to yellow |
| Viscosity
MB, 1+8 (125°C) |
47-54 |
| Differences
in viscosity in one lot, units, max |
6 |
| Nonsaturation,
%, mol. |
1.6
± 0.2 |
| Ultimate
tensile strength, MPa, min. |
20 |
| Modulus
at 400%, MPa, min. |
7 |
| Relative
elongation, %. min. |
620 |
| Loss
of mass at drying, %, max. |
0.3 |
| Ash
content, %, max. |
0.3 |
| Iron
content, %, max. |
0.01 |
| Antiaglomerate
content, %, max. |
1.1 |
| Stabilizer
content, %, in range |
0.05-0.20 |
| Other
admixtures |
none |
| Vulkanizer
parameters (MN, ML-dN*m, ts2, ts50, t90,-min) |
optional |
| Disclaimer: The information and the data
presented herein are to the bestof our knowledge true
and accurate, but no warranty or guarantee express or
implied is made nor any liabilty accepted to the useof
such information and data |
|
